Recent content by brbrown

Yes, I hadn't thought of that which may also account for the different descriptions.

Hello 45, yes it was rather a long time. I meant to put a red faced smiley in and forgot. Twgas, all is now well thank you.

Hello Denso. Thanks for the reply. I am puzzled why they are being sold at different prices so I will go for the cheaper one. Thanks again for your help.

Hello Folks. I know it's a bit late now but please accept my apologies for not acknowledging your last replies. I didn't get an email telling me someone had replied. I have just accidentally clicked on my old Watched Topic and discovered the other replies.

I am after a replacement washer/seal for a SIAMP toilet cistern inlet valve for a cistern as originally supplied bi MFI. Can anyone please tell me the difference between the following as advertised on Amazon’s web page...

Thank you all for the replies. In the past I have always had both the boiler and cylinder stats set to 140 which has always appeared to work satisfactorily but things seem to be working now with the boiler set at 130 and the cylinder at 120 which bears out what you say.If it wont work at the...

Thank you for the information. I don't wish to change the system from the way it worked before. I'ts just that I the valve will no longer switch over to heating when the cylinder has reached the preset temperature. I have however just discovered that if I turn the cylinder stat to a slightly...

Hello. I believe the system heats the water cylinder first, then when up to temperature, the valve switches over to the heating (if the room stat is calling for heat). If I did not want to wait for the cylinder to heat, I could always move the lever on the valve to bypass and the heating would...

That's where a puzzle comes in because, when I set the room stat to call for heat, the boiler comes on and indicates this on the stat display but does not switch the valve over. Also if I turn the boiler stat temperature down, the boiler goes off. If I turn the cistern stat temperature down, the...

I have a Gas Board heating and hot water system which uses a Glow Worm boiler with a Honeywell room and cylinder stat, Randall time clock, Honeywell three way motorised diverter valve and WSP pump. When the time clock is set to "time" or "constant" with the room stat calling for heat, the...