Sean,
My toilet has just developed the same problem. in my case it's a little washer thats sits inside the float valve. Not sure how a float valve works, but the washer has got a small split and now the water flow is down to a trickle.
I'm now after either a replacement washer or a new float...
Thanks Kevplumb for suggesting something else.
Having read other posts on this forum about airlocks I have just had a go at trying to fix this problem.
I connected the cold water supply to the hot water supply, first turned on the hot and then turned the cold on. I left it this way until the...
I've more or less ruled out the taps being the main problem. seeing as we didn't have a problem with the old taps, I've put the old taps on using the new fittings and the problem is still there.
I've replaced the flexi-hose and removed the isolator valve and I've still no joy.
I think the next...
Thanks for your response. I've had a look and the taps are compression valve mixer taps rather than the ceramic disc type (see link).
http://www.franke.co.uk/pdfs/retro.pdf
The only thing different between now and before is that I've put an isolator/quarter turn valve (compression fit) on...
I have recently fitted a new kitchen sink and a Franke mixer traditional style tap (baroque style - with the 90 degree right angle almost). The cold tap works fine but the hot tap isn't flowing as fast as before. The tap we had in before was quite a high up style tap so thought this design would...