Recent content by Brydo

This is helpful as it's my first attempt at using filler, thank you. I already have the Easifill, will use the tips you suggest and see how it goes!

I am preparing to decorate my home office in my [now 4 years old] new build home. It's timber kit with internal plasterboard. We had some light panels stuck on the wall with an adhesive that has removed some the top layer of the plasterboard as shown in the attached photo. My plan is to fill...

This is super helpful, thank you!

I have the blue bit set to the 38mm notch, and also had the step on the drillbit sitting at 38mm when tightening the collar which is what the Amazon and written instructions say. Perhaps I've wrongly assumed that the drill bit will run to the end of the timber. I'm working with some scraps so...

Good morning, I am attempting to use a pocket hole jig for the first time to put together a workbench in my garage. I'm working with 38mm CLS and picked up this jig from Amazon. I believe I've followed the instructions, in the first photo below you can see I've positioned the slider to align...

Thank you all for the input. The space that's missing I have the plywood sitting aside. I'm thinking it may be easier for me to source something to use as a spacer (Offcut of ply?) and re-use the existing board albeit sitting at the correct height? Everything, and I mean everything in this...

We're starting to improve on our home and fix a lot of bad decisions made by the previous owners and tradesmen who have worked here before. One thing is the floorboards have been lifted in this bedroom and replaced with a board - the board is thinner than the floorboards therefore is a dip when...