Recent content by Budnzeus

Yes the first light that I think is the power one is on and the second which I think is the WiFi is flashing. I’m almost sure this is what has always been on but the smart com and panel are hidden in a cupboard that I don’t go in very often.

Tried guest network it didn’t work. Only thing I can think is that the smart com is dead.

It was showing com 1 not used (as I was using this for the connection) com 2 as com ip and com 3 as gsm. Then after I had disconnected I changed this to smart com. My plan tomorrow is to connect using a guest network on the broadband to rule this out.

So I’ve got an update. I managed to connect via wintex and not sure how but the gsm module is now back up and running. By doing this I’ve proved that I haven’t fried the com ports. Still no joy with smart com. Really lost on this.

That’s the app I have.

Any idea how I fix it?

Seems I have two logins one in the dogs name one in mine….. Any idea on how I fix the issue? Have i fried the com ports?

Sorry I don’t understand?

Check all of that it’s all correct. It’s almost as if there’s a global setting been set for coms to be off that u have somehow turned off. I’ve also checked all of the arc profiles - several are set as sms and one is set as smart com / I’ve tried deselecting this and then putting it back in...

The smart com is on com 1/2 the gsm unit is on com3 It’s the texecom premier elite 168. I tried to connect via a cable from the laptop to com1. I also did a reboot on the hub etc to refresh the ip addresses etc. I have checked on the panel and com 1 is smart com / 2 is com ip and 3 is gsm...

Already got one! If you are who I think you are you know the hassle I have with the other half forgetting to turn off the garage alarm as well

Is there a way on a Texecom premier alarm that I can have it programmed to set at say 1am every night? My other half comes up to bed after me and keeps forgetting to set the alarm.

So originally I had a virgin sim which was piggybacked off ee and it worked fine, virgin then sent me a new sim that was piggybacked of Vodafone and that’s when the issues appeared to start. I changed to gifgaf - which is off o2 and it worked ok for a few weeks but then has started playing up...

Hi wondering if someone can help? I have a Texecom premier alarm and keep getting a com fault on com 3 (gsm) and first I thought this was down to mobile phone signal dropping so changed the sim to a different provider. I still get the fault coming through on the panel every few days but the...

Yes it is. That’s what I want it to do. I was thinking of setting it up area area c as a is the house and b is the garage. If there’s someone outside I don’t necessarily want the whole house awake until I’ve checked it out myself if that makes sense. we’ve had a bit of petty crime in the...