Recent content by bullseye123

just been looking at fixed shower heads and most haf got 1.0 bar or 0.5 bar mp...im not clued for bar pressure so can anyone shed a light if I haf mains pressure to this heater wat bar rating would that be and am I right in thinking a reduce flow on the hot outlet would reduce the bar to the...

ok then...ive put an isolating valve on the hot outlet to act as a tap so to reduce the out flow and hey presto its just as the bloke at zip sed...no different to a electric shower...works perfect got the temp up to 51deg could go higher but it was scalding and the flow was very generous,that...

im going to put a shut off valve on the hot water to act as a tap then see how far it has to close to reach a decent temperature then hopefully still got a good flow...if it don't work only option is a electric shower then there will be a water heater goin cheap

spot on with all that..thing is ive just done a trial with cold water in and a shower handset on the output to see wat flow I get and the right temp to see if its compatable with a fixed head in the ceiling...ive got the flow but 5deg short on temp for a normal hot shower

cex-o oversink model

this refers to a earlier posting ive bought a zip inline instantaneous water heater 5lts a min .. ive tested it out with a ordianary handset, the temperature is a max 55c but on testing by thermometer it only reaches 37c and its a direct cold feed into the heater...the flow is good.will there be...

its not wat I wanted to hear but thanx for that

I am in the middle of building a wet room and as I have solid fuel heating ( no combi ) or immersion heater I rely on electric shower in the summer months...I don't want an electric shower showing in the shower area so I purchased ( zip inline electronically controlled instantaneous water heater...