camerart's latest activity

  • camerart
    camerart replied to the thread RCD trip.
    Hi E, I see! I could set up a switch-over in case of one RCD failing, but it's not worth it, the next time it could trip the main one...
  • camerart
    camerart replied to the thread RCD trip.
    Hi J and E, Good job I asked, thanks. C
  • camerart
    camerart replied to the thread RCD trip.
    Hi, As a matter of interest, say an RDC bank trips, leaving an untripped RCD bank, is it possible to make a extension lead with two...
  • camerart
    camerart replied to the thread RCD trip.
  • camerart
    camerart replied to the thread RCD trip.
    Hi M, I didn't before today! I have a socket tester, but this 'see' cumulative leaking? C
  • camerart
    camerart replied to the thread Games and pranks to play.
    Hi, I've had lots of jobs since the 60s, and one of the pranks was being sent to the stores for a 'long stand'. After the first time I...
  • camerart
    camerart replied to the thread RCD trip.
    Hi E, Ok, thanks, I'll empty the crumbs :) I have different types of radio, and may be able to hear noisy switches, I suppose this may...
  • camerart
    camerart replied to the thread RCD trip.
    Hi P, At first it wouldn't switch back on, then did switch on. I've used the toaster since, no problem. C
  • camerart
    Hi, I'm no expert, but insulated downstairs walls 100mm foam. Ad as I was also doing building work, I needed building control, who made...
  • camerart
    camerart posted the thread RCD trip in Electrics UK.
    Hi, I have an RCD that tripped, that covers the kitchen. I read other similar posts, and eliminated the boiler, outside socket, shower...
  • camerart
    camerart replied to the thread Draft from Door.
    Hi K, Good idea, when she comes down from fixing the tv aerial. C
  • camerart
    camerart replied to the thread Draft from Door.
    Hi R, Yes, and I've moved the lock bar as far as it will go. Regarding gasket: There is a round beading glued onto the door, and I...
  • camerart
    Hi F, I recently used planning permission, and wanted to use my idea, instead of the convention, I chatted to an architect (no cost)...
  • camerart
    Hi N, I'm a complete amateur, so take this with a pinch of salt! I would submit the plans, and BC, will tell you if you need anything...
  • camerart
    Hi, Somebody (Me) fitted my backdoor, and twisted the frame a little, so now there's an 1/8" gap at the bottom, which cases a draft. (I...
Back
Top