Recent content by cantthinkofanickname

OK

Have now discussed this with the LA and an electrician. He is going to fit a new MB. Prior to that we are going to move a cooker wire, fit a new cooker point and connect the cooker and hob into that.

I need to feed a cooker and hob. Plan is 6/10mm feed from ceiling in 50mm plastic duct down through gap between wall & cabinet, through back of cabinet to adjacent wall mounted oven rated switch (no 13A skt). To feed the hob which is 6 cable metres away (in plastic duct,again with ring and...

Hmm, just talked to my mate (we are going to fit the kitchen together) and decided to save costs but make it "legal". 1. I assume we need to fit a new ring main (MIT132) to supply the kitchen separate from the rest of the flat power circuit. This will mean fitting a new MCD/RCD 32A in the...

1. Do I need a separate circuit from the MDB for these and what would be the best rating for RCD? The oven is a Mwave + double and the other a ceramic hob with 4 rings. 2. If I can have them on the same circuit how does one branch to the next unit in the run. 3. Can I do this all myself...