Recent content by Canyouhelp

It's all piped up ok. The boiler is an old un... Potterton floor standing 14kw, A relic really I suppose but works ok and does the job. I switched the boiler off yesterday and noted the meter reading checked it this morning and meter at same reading. So all a bit bizarre as all weekend the...

Two tanks in loft, so twin vented and neither ball valves are operating whilst this is happening. Yes we can rule out the obvious, it's the water meter not the gas. Not sure what the meter is reading in on the unit of M3 as its got 4 black digits and then 4 red so presume the last digit is...

Two tanks in loft, so twin vented and neither ball valves are operating whilst this is happening. Yes we can rule out the obvious, it's the water meter not the gas. Not sure what the meter is reading in on the unit of M3 as its got 4 black digits and then 4 red so presume the last digit is...

Meter is inside, draw is definitely after meter and only occurs when the heating pump is running :?: There is no pipe work below floor level and no wet areas above floor level no obvious signs anywhere. I was wondering if the pump could somehow be pulling water through from the cold feed but...

Hi all, Any ideas what would cause a constant draw on the cold mains on a open vented gravity pumped system? I noticed today that the water meter is going round consistently and pin pointed it to the heating system as only does it when pump is running. There's no valve letting by in...

Hi all , wondering if you can help. when I fitted a Legrand dimmer switch to my 2 way circuit the lights were dimming and then brightening constantly on there own? At first I thought that maybe a duff switch so I replaced it but still does same thing. The switch it the main switch on the 2...