Recent content by CarlosD

  1. C

    Honeywell ST7100 to Hive receiver

    Think I might just bin it and get a new combi boiler fitted as the system is quite old.
  2. C

    Honeywell ST7100 to Hive receiver

    Hi the wire from the HW off(7) goes to terminal 2 on the cylinder stat and the grey wire on 3 port.
  3. C

    Honeywell ST7100 to Hive receiver

    Think this is the way I wired the Hive up
  4. C

    Honeywell ST7100 to Hive receiver

    Sorry yes the HW off was wired in, I wired the com 6 wire into the live on the hive receiver and think I should of wired it to the L on the boiler and the number 1 on the cylinder stat to the s/l on the boiler?
  5. C

    Honeywell ST7100 to Hive receiver

    Ive attached a wiring plan of the original wiring
  6. C

    Honeywell ST7100 to Hive receiver

    So I have a Honeywell ST7100 programmer and have attempted to connect a hive dual channel receiver, the system is y plan fully pumped, all connected able to switch hot water and central heating on and off via the hive thermostat the heating is working fine but despite the boiler coming on for...
See more
Back
Top