Hi there you can also use a product called sealdeck made by laybond flooring. Thisis a two part epoxy surface menbrane which will seal the floor before you screed over. available from good floor trade suppliers :!:
______________________
Lynda, moderator, please see forum rule 12
Hi there curving the edge could be done with Top trim from Quantum profiles. this is a plastic section which can be curved. unfortuatly they stoped doing a wood effect section recently due to lack of sales it is available in brown.
regards Steve. :lol:
_____________________________...
Underfloor heating is fine but remeber you will need the correct underlay which is called Roma made by Ball & Young Ltd. It is the only underlay with the correct tog rating for underfloor heating.
____________________________
moderator
url removed please see forum rules 14
Landing carpet would normaly be the same as the stairs it is possible to finish the top step with a single naplock but not usual. If you have put stairrods on and tried to make a feature out of it. That might work.
_________________________________
moderator
url removed please see 14...
All carpets when fitted should remain on the gripper, if you can pull it up with your fingers it is wrong. :roll:
____________________________
moderator
url removed see 14, forum rules