Recent content by caz1562

cheers m8 - I have noted they must have been fly by night cowboys. Its only now that we've found out the they built the oven unit wrong :roll: Thanks for your comments Just one thing - In ur opinion, would the socket be OK in the cupboard under the oven ?

OK m8 - what about the cabling size ? Am I correct in stating 6mm should be OK The guys who fitted the kitchen have sockets inside a few of the units (fridge, freezer, dishwasher, washing machine & tumble dryer) What about the dist board - I've a spare 40A & a 32A trip. thanks again

its inside the wall unit next to the oven housing

Just been to B&Q and seen this :- This means I can utilise the double socket to the side of the oven and replace with this.

Due to the room layout L-shaped, the oven sits in the corner and is surrounded with cabinets so no walls are in view (if you know what I mean)

C'mon some expert/professional must be able to help me here plz

BTTT One other thing - I've read that theres a requirement for the CCU to be within 2m of the appliance. My hob is OK but my oven is a good 3-4 metres away. If that is the case and I can't use the current switch then I'll have to install a new one. The problem is where do I install the...

This is my 1st post so go easy on me ;) The single oven I have is dead, so we've ordered a new double oven. I removed the oven unit & modified it to suit the bigger oven. The power supply for the single oven is just a 13A socket into the 32A socket ring circuit. The new appliance requires...