Recent content by ceresdelta

Hello everyone, I have a Bosch heat pump dryer in my garage which has the option of emptying the condensate drawer after every use or attaching a drainage hose. I don’t have any drainage in my garage but there is a guttering downpipe on the other side of the wall (which already seems to have...

Got it! Turns out the switch on the wall behind had a wire feeding the live from the switch to my problem room. When I replaced it I had wrongly assumed the feed had fallen out of a connector block in there - in reality it had fallen out of the old switch. All sorted now. Time for a brew...

I have a digital multimeter, what should I be looking for in terms of voltage / continuity between the wires? I did change a light switch on the wall behind the problem one. So I think a wire breakage is a very real possibility.

This is the tester I have: http://www.diy.com/departments/bq-pen-type-voltage-tester/179657_BQ.prd It seems to work when I test other light switches, but I'm getting nothing from the one in question.

Thanks for the help, nothing I did could get it to work. I even tried putting a regular 2-gang switch but no luck. Turns out I can't even detect the permanent live with my tester so I might have bigger problems so a call to an electrician is in order. This started from a powercut which I...

Thanks, which should I put the link in? Com-com or L1-L1?

Hi, I'm trying to replace a double dimmer switch that controls 2 sets of lights. 1 dimmer controls ceiling lights, and the other controls 2 x Alcove lights. When I took the old switch off the wall I found 3 red wires coming from 2 different sides of the box connected to the switch and 1 link as...