Recent content by cheekylemon

I think I may have solved this now. I connected the live of the pump to another terminal (estimated guess if I am honest, after looking at my DIY book, the Internet, and the wiring at the back of the timer). Now as long as the heating is set to ON, the pump will run, even if the boiler has...

Thanks Gordongas, I shall check the wiring out tonight incase I have inadvertantly crossed a wire or something. I appreciate your help :)

I only disconnected the cable that had been cut. The Live and Neutral wires were not connected, and assumed the person who installed the new control box just cut them, but did not bother with the earth. As I had to replace the metal box behind the controller, I removed the earth for the dead...

Hi all, some good answers on here, I'm hoping you will be able to help me with a small problem. Basically, when I switch the heating on the boiler fires up, and the pump (which is upstairs with the hot water tank) starts to run. This is fine, but when the boiler stops running, so does the...