rsgaz - OK thanks for your help,
I was hoping to connect an outdoor light in place of the old PIR which I could then turn on and off with one of these switches (a one-way switch). The other switch is irrelevant and will not be used.
The yellow wire is not being used as an earth (currently...
OK so basically whoever connected this up just used the 2 gang to make a permanent live connection to both circuits, as it stands the actual switches are irrelevant? is this correct?
Sorry if I haven't made it clear, I was testing the red and blue that comes out of the wall in the back garden. Before I made the diagram of the current switch in the garage I disconnected the outside PIR to give a Red Blue and Earth coming out the wall. I then tested the red and blue against...
There is only no power when the fuse is pulled, when the fuse is in there is always power between live and neutral no matter if the switches are down or up or opposite to each other?
Hi, the above image is the currently connected state of a 2 Gang switch which I believe was part of the old house alarm that has never worked and mostly been taken out. I was assuming that these two switches powered the internal PIRs, outside alarm boxes and an outside PIR.
I was hoping to use...