Recent content by ChrisA12

Hi Guys Found out the problem and sorted it. Gave the pipe a little poke with a pipe snake. Then got the good old dyson over the pipe end after the trap and turned it on. Out cam a cupful of limescale. Culprit the Cat. The dirty sod has been ****ing in the sink creating limescale in the pipe...

Dan , the bit that baffles me is that when the Ubend trap is on the sink it drains slow but take this off and the drain off is a reasonable speed down the pipe.. So why does the Ubend Trap cause the drain off to go slower. ?As previous the Ubend trap is clear.

Dan , How does a vacumn form in the sink/pipe?

Dan , I have checked . I have poured water into the overflow and it flows out of the holes in the plughole

The Sink is V and B and the overflow is built into the casting. 3 holes that drain in to the plug hole. These are ok and not blocked. So not the overflow. Thanks anyway

I have a blockage in my bathroom sink, now going down at 1 lt every 5 mins. Took off the trap and no blockage. No blockage in the sink. Wired the down pipe to about 14 inches and no blockage. This is the bit that confuses me, When I pour water straight down the down pipe it drains off at a...