Recent content by chrisgatguis

Hi, thanks, the boiler man replaced the little black DHW flow switch but the issue persisted unfortunately, he then removed another large componant to the LHS of the switch to get access to the actual brass part containing the magnet.. this was the problem, it was stuck in place...

Wow, now this post really does take the buscuit, I look at the number of posts you have made and feel sorry for all the people you will have no doubt replied to in the same manner. Number 1 - DO NOT MISS QUOTE people... who gave you permission to re order what I had previously written to show...

Hi Dan, Thanks for the suggestions, I don't have any leaky taps, For some reason I can't get the valve to close fully and I'm putting a fair bit of effort into it (and the close direction is labelled).. So I decided to turn off the main supply to the house in the hope that this would...

Thanks for your opinion on my repairman. Any opinion on the problem? Thanks Chris

Hi, sorry to dredge this thread up from the depths of last year but I have the exact same syptoms as this, What was the fix for you in the end? Also did you do any tests with a magnet? If we unplug the sensor the flow LED goes off and C.h is able to work. The problem I can't...

bump :D

Hi, Bit more info, I suspect its something to do with the divertor valve. In the manual one of the descriptions of a fault is "in C.H mode the main temperature reaches 75 degrees but the heating does not work. D.H.W operation performs as normal" There are only two possible causes - one...

more info: there is a small red LED light on towards the back / top of the main circuit board. this light is on at all times Thanks Chris

Hi there, our central heating has stopped working completely, have reset the timer, checked the thermostat is set etc. Hot water is still working completely as it should be when needed. The main syptoms / indications I have are that when all hot water taps are OFF, AND heating ON or OFF...