Recent content by chuck1000

Thanks very much. If I go with the connector block under the floor board, it can be accessed fairly easily by unscrewing a piece of floor board. Does that sound ok or am I breaching any laws/safety laws?

I need to move a wall socket about 1metre on to another wall but the cable into the socket isn't long enough. What is the safest way to join a peice of cable. I've bought a "Flex Connector 3 core 13 amp" which seems to allow me to join the 3 wires from both cables. The connector would be placed...

It was meant to be a bit of humour. Here's a link to something similiar. It's the first mixer tap on this page http://www.diy.com/diy/jsp/bq/nav/nav.jsp?action=detail&fh_secondid=8450028&fh_start_index=20&fh_search=kitchen+taps&fh_eds=%c3%9f&fh_refview=search&ts=1148117324336[/list][/url]

You mean you can't give me an answer with the info I've provided? :) Ok, can't give you the make or model but it is 3 years old and is a chrome finish. It is single lever and the hot water comes from a tank.

Got a problem with my kitchen mixer tap in that the lever can become very stiff, when lifting it up and down. This can go on for weeks then resolve itself before becoming stiff again. Any ideas?

I want to fit a TRV to one of my radiators. I\\\'ve never done anything like this before. Is it an easy job or not one for an amateur? Some websites seem to mention referring to the boiler manufacturers guide? Do I need to do this for one radiator? Any guidance would be helpful.

I'm putting in a new ring circuit and I'm now at the stage of connecting the wires in the Consumer Unit. I've installed and MCB and I'm happy with where the live wires go. The problem I have is with the neutral wires. I understand that they get connected to the neutral bank but there are no...