Recent content by cjt20

No I didn't hear any hissing. I'll have a look tomorrow :-)

Thank you, I have indeed made that mistake. Corrected now :-) The pump speed was already on the top setting, so maybe better radiator balancing was the cure?

Here is a photo of the pump in my boiler. I've turned the dial in the direction of the arrow. I'm assuming this is the pump speed? I've turned it up a bit from where it was, but probably not on full.

I've turned the pump up a bit and re-balanced. The bathroom radiator is reasonably hot now. I can touch it for a couple of seconds at the most. It's not perfect, but a vast improvement on what it was before I started :)

I've turned them all off except for the bathroom. The feeder valve is too hot to touch, but an inch away, on the radiator itself, it's warm rather than hot. I'm pretty confident there isn't a blockage as I've left the water flow from both pipes for a while. Also I'm using new valves so I...

Thanks for the reply. Do I turn the other radiators at both ends or just the thermostatic valves? Is it normal for water to flow from both copper pipes?

There are two rooms at the front of my house - the bathroom and office. Both have always had luke warm radiators. The rest of the radiators upstairs and downstairs are good. The bathroom radiator gets hot at the left side valve, but directly after it (the radiator itself) is cold. I...