Thanks. It’s unvented - we have a 310l unvented cylinder. Pressure is 2.5bar at the kitchen tap (next to the boiler).
The pump is a grundfos 15 50/60.
We only recently hooked up one of the reds and bled the air from the that rad. Is it worth checking all rads again for air?
Thanks
Hi,
I was hoping to get some advice on this issue before I call another installer to take look. The original installer although helpful doesn’t really seem to have much to suggest of help beyond “it’s probably air in the system”
A year ago we had a complete new h/w and heating system...
Thanks. The manual doesn't state the size of fuse to use - only to wire in 2.5 t&e.
If I was to wire it from the dual outlet in 6mm t&e would that be incorrect, dangerous etc?
If so in what instance could you use a dual outlet plate?
Many thanks again, I really do...
Thanks. No, the oven is not supplied with a plug - the manual states it should be wired in 2.5mm² cable.
Perhaps one of the sparkeys could chime in?
thanks again
Hi all
Long time lurker, first time poster. This is a great site with some really helpful posters so I thought I would ask my question here. I have read through other posts but couldn't find a direct answer to my question.
I am wiring my new open plan kitchen (under a Full Plans...