Recent content by Cliff

  1. C

    CH problems with Primatic cylinder

    Pump is working, turned it up to see if that clears the problem, but to no affect. Will try checking anti gravity valve
  2. C

    CH problems with Primatic cylinder

    I have been to a property with a primatic cylinder. Rad upstairs working ok, rads downstairs cold. Have bled them & ensured rad valves are open. 15mm pipework coming down to rads is also cold. Any suggestions on why lower rads are cold ?
  3. C

    Ravenheat Little Star combi not working properly after drain

    Thanks for info - opened air vent a little more - still have a problem with burner cutting out when one of the taps running. If I have two taps running the burner does not cut out ? any idea
  4. C

    Ravenheat Little Star combi not working properly after drain

    Just drained down CH as a lockshield valve was broken & had to be replaced. Did it myself, but since filling system back up there have been problems. When the HW taps are open or the CH sytem is on the bolier starts, but then goes off & comes on. No HW & CH not working efficiently. Sytem fitted...
Back
Top