Recent content by cliff1961

  1. C

    Honeywell CM927

    I have a combi boiler! it is the heating coming on every 10 minutes, the water heats up every hour lighting up all the red Neon lights. I have found a away to figure out what is causing the problem! 1: Set the target temperature 19C Once temperature is reached the heating will go off...
  2. C

    Is my Honeywell CM927 wasting gas?

    I have the same problem, and it drives me nuts! Below is honeywell's reply to the problem! The CM927 operates a CYCLIC boiler on/off mode when near (within 1.5C) setpoint ; this is to inject just the right amount of extra heat into the radiator system such that the radiators emit heat...
  3. C

    Honeywell CM927

    I shall see how it goes over the next week, i may even get another thermostat as it drives me nuts coming on every 10 minutes. i would rather nothing come on until the temperature drop 0.5C below target temperature which makes sense. coming on and off so regularly you may tend to think, the...
  4. C

    Honeywell CM927

    That is what i state, why call for heat when it is not needed? But been in touch with Honeywell technical support and just had a few replies The CM927 operates a CYCLIC boiler on/off mode when near (within 1.5C) setpoint ; this is to inject just the right amount of extra heat into the...
  5. C

    Honeywell CM927

    At first i thought it may be too near the music centre but moved it 3 meteres away but made no difference, this still occured 10pm at night. Electric cooker is 6 metres away and was off, gas fire 6 metres away and switched off too, 10pm at night there is no sunlight shining through LOL
  6. C

    Honeywell CM927

    matthew Many Thanks for the reply & information, Yes i have had it installed 3 days ago. Find it strange the flame icon is on for so long and times when it is not! Target Temperature 17.5 Room Temperature 19.00 Heating will come on every 8-10 minutes as long as the flame icon is...
  7. C

    Honeywell CM927

    Just had a Honeywell CM9272 days ago but some functions do not make sense to me! I have a Target temperature 17 degrees Room temperature 18.5 degrees but as long as the flame icon is on the boiler starts every 8-10 minutes for only one minute making no alteration to room temperature. Even...
See more
Back
Top