Recent content by Cluelessandpeniless

Thanks for the idea I would loom into this too but how would the female coupler connect to the rod?

It does attach to a downwardly protruding bolt

Thank you for getting back to me, unfortunately the stem fits into the chandelier base and then the arms and glass so it has to be 16mm or it would not screw with the rest of the ceiling light

thanks, I will give it a go on Monday

Are there any that you suggest? This is a 16mm diameter rod/ tube that needs to be threaded internally

it is thin tube diameter 16 mm with internal threads on both ends. You might be right there

Hello DIY people I have bought 2 ceiling lights for my living room/ dinning. The room has two lights and the first one was fitted fine because the room is on two levels. But it turned out that the chandelier would be too long for the ceiling hight on the living room side. I need to cut and...

Hi I just wanted to say you were right. The diverter shuttle was broken and stuck in closing position which meant that the water was blocked both to the shower head and spout. Unfortunately to take it out and replace it, I needed to open the top taps but I wasn’t budging. I managed to take out...

Thanks jj4091, that makes a lot of sense! I will give it a try first

Thanks for your response. It is this type of taps. There is no aerator on it and both taps feel normal when you turn them on and off except for the fact that no water comes out of the spout. There is no aerator on this one. Do you think I can just replace the top taps but not the whole thing...

Hi everyone I am looking for advice. I have a bath mixer taps those traditional ones from ideal standards. They came with the house 2 years ago. They turn but water does not come out! In fact the body of the mixer tap gets warm with hot water but no water is running. There are no issues with the...