Slightly bigger than average I'd imagine. Detached, 3 bedrooms. Not a castle, but probably about as big as you'd imagine an average detached 3 bedroom house to be.
The boilers has been working well since I moved in, and it's been in place for the last 2 years. So I'd guess that it's not a case of it being too powerful.
Out of all of those things, is there anything that someone with zero experience with boilers could easily look in to before getting a...
I'm having problems with the CH for my Worcester Bosch Greenstar 42CDi combi boiler. The boiler is basically repeating the same routine:
1) The flame lights, and the temperature display rises rapidly (around 1 degree per second) until it hits around 60 degrees or more.
2) The flame then goes...
It's also now showing this error:
"The display shows alternatively the CH flow temperature and this code. The gradient limitation is active. The primary temperature is rising too fast and the burner has switched off for 2 minutes."
According to the installation manual, these are the...
Okay, I'm still having a few problems with the CH despite the pressure looking fine and steady at 1.5. The boiler is basically repeating the same routine:
1) The flame lights, but the temperature display rises rapidly (around 1 degree per second) until it hits around 60 degrees or more.
2)...
IT WORKED!
Excellent, thank you so much. You described the process wonderfully. You even nailed the "Expect a few drops of water to come out, this is normal" bit. I've just re-pressurised the boiler to 1.5 and everything is looking good so far. You're a champ.
HERES WHAT I DID:
For...
Hi everyone!
Since coming back to the house from a weekend away, I've found that the CH for my Greenstar 42CDi Combi Boiler is not working. Here's a picture of the boiler panel:
http://i43.tinypic.com/sy9xqt.jpg
And here's a picture of the digital thermostat...