Recent content by Concerned

ok, I will investigate the costs or ripping out the whole setup and basically starting again baldelectrician, but this close to christmas i feel the more realistic option is ban-all-sheds suggestion of a small CU. This would keep us going in the meantime. On the other issue of the...

Just checked, the power switch has a 30amp fuse in it, personally don't know if thats good or bad, find out after work tomorrow i guess, thanks all.

working on a direct link but amended previous post to explain how to see photo, i added (after a few tries it appears it doesn't...to see the photo right click the red X and select 'properties' then copy and paste the address shown into the address bar to see it)... sorry but i can't find...

Thanks for all the replies, very helpful since i know nothin about electrics. I will get this guy back to explain why he did it this way, then get someone else to check it all out. Hope the link to the photo works (after a few tries it appears it doesn't...to see the photo right click the...

Thanks for this. I think it had been the way it was comissioned. I've spent the afternoon dismantling emptying and cleaning the whole setup and recomissioning step by step with the book and it worked!!! Only thing is i'm still a little scared to use it... I think, as you say, there should be...

Bought a 10.5kw unit to replace old 7.5kw. Replaced 6mm cable run with 10mm then got a spark in yesterday wire it all up. I have a couple of concerns about the work he did and would appreciate any advice. 1) 10mm runs from shower to 50a pull switch to 40a RCD, but the spark did not replaced...