Recent content by Conor017

Thanks Terry, I'll try that. Should I be worried about the way the whole fitting behaving and unscrewing?

Thanks John, thought I had added photo, tried it again on the original post.

Hello, have a radiator which makes a clicking/knocking noise when heat comes on and have tried to bleed it as first action. Using a bleeding key, cloth when I try to bleed it the whole fitting seems to move round and the result is water drips out "behind" the outlet and not out where it should...

Yeah thanks, so basically check (or replace) the clip and re-use this solution? I had thought to simply tighten the jubilee clip again but i have no way of knowing when its an issue until my neighbour downstairs rings my door :-( Lets say I did tighten the clip is there any "detection systems"...

Hi All, Thanks for taking the time to read. We've had a few issues with this Saniflow SanVite 3 that is used to pump water from our kitchen (Washing machine / dishwasher / sink) Initial issue was the coil like pipe connector (marked A) had become worn and split which meant water was streaming...

Thanks ever so much for the advice. I guess i can get this duct at my local b&q? That's a huge help to do it like this now to benefit later.

Hi. Thanks for taking time to read. Doing the garden up in 2 part project. Part 1 is some paving / landscaping down the bottom and Part 2 at a later date is new grass lawn. I want to put power down to the back for longer term use (maybe a day room in future or short term general device...

Hi everyone Thanks for taking the time to look at this thread. I have an outdoor tap that leaks from below the tap spout. In the attached picture it's leaking just above the filler foam, you can actually see a drop developing.... How does I fix this? Where the leak is there is also a nut...