Recent content by Craig McFarlane

So just to complete the post. Got in contact with Tado. Both Blue Neutrals to N Both Brown Live to L Black Wire to connection 4 Brown Jumper from position 1 to position 2 I had a brown live wire that was going from L to connection 2. This was not needed. Cheers Craig

Will give Tado a call in the morning. Hopefully they can check that everything is setup right. Thank you for your assistance today.

The Tado extension box by the boiler is flashing. The thermostat is not flashing. According to the manual the extension box should pulse. Just not sure if 4 flashings is classed a pulsing.

Also my extension is flashing 4 times and pause and then flashing 4 more times. Like that in repeat. From what I can see everything is connected

Thanks mate. My thermostat is wireless and this is ok right? I mean it’s only battery powered not hard wired.

Thanks mate. I’ve had to more the black wire from 4 to 2 just so the heating kicks in. Obviously I now can’t turn the heating off. Mrs kicking off so have to appease her for a bit. My boiler timer is set to on. This has always been the case as had to set it like that for Nest.

So I have wired as per your suggestion and been through the installer menu on the thermostat and set it correct. I believe. Temp on the stat is saying 20 degrees but if I change to 25 nothing happens. The boiler still does not kick in. Anything else I can look at?

Thanks mate. That setup on the Thermostat I have defo missed. Maybe that what the problem was all along. Will give this all a go

Thanks mate, really appreciate your reply. I am sure I have tried this , and I'm sure you are right. I think I also need Tado to active this thing as well. I give your suggestion a go in the morning and get in contact for them to allow the install to continue.

Hi Guys. Hoping someone can help. I currently have the Nest heating system connected to my Glow Worm FlexiCom 30CX system. This is work with no issues. I am trying to move from it to the Tado and in turn install the Tado extension. So I will try to explain the setup as best I can. Hopefully...