Recent content by cupotea

Ok got it: So feed from existing socket in loft to 13A FCU to switch on wall in room to socket to supply LED strip. Label/notice to advise that the switch on wall has 2 circuits: comprising 1 circuit for the rooms main light and the other being a spur to the plug socket. Should the FCU be...

Ok the LED strip comes powered by a plug in power supply. The switch on the wall will be new (double instead of single switch at the moment so I can have the normal existing room lights and the new LEDs on the wall switch working independently) The spur would be from an existing socket already...

So route the live wire of the spur through the wall switch correct?

I want to fit an LED strip lighting set high up on a wall in one of my rooms. Looking to hide all wiring in loft space above the room and control it using the rooms light switch on the wall. So trying to find out if the light switch (250V 10AX) is suitable to use to control a single spurred non...

One more thing. Are there any problems with the increased volume once the 3 new rads are added to the existing system in the house? Thanks

One more thing. Are there any problems with the increased volume once the 3 new rads are added to the existing system in the house? Thanks

Thanks for the info whitespirit. Thats pretty much the way I had in mind. Thanks for the tip on full flow lever isolation valves - I was about to use the standard ones like under the sink!!! I take it the full flow ones can be bought from all the usual places -Travis Perkins etc?

Help please, I'am doing a garage conversion and need to install 3 new rads in total. I have a feed coming into the conversion (15mm, inlet and outlet) done by a builder at an earlier date, currently just capped off. I have plumbed in the 3 rads and the pipes now all need to be connected up...