d000hg's latest activity

and to fit the f connectors to the cable watch this first

Thanks both. It must be RG6 because I measured it at ~6mm - looks exactly like in the video posted too. Looks easy enough, fingers...

If that fits your coax, it will be fine.

I've discovered the TV signal is awful in a BTL property and found a suspect joint in the cable hiding in a corner - it's held together...

This seems an easier option then. Like you say I can add some insulation at the same time. Cheers

Osb is rigid , 18mm is ideal .

Hadn't considered that, because it's a smaller space you mean? I think the floor dimensions might actually be almost exactly 4.8x2.4m...

Would it be worth just throwing a plastic DPC sheet on the slab underneath then? I didn't really want to install floorboards as I...

Joists quick and easy and allows under floor dpc and insulation .

See that was my original thought but seemed like more faff and I have already studded out and panelled the walls. I did consider using...

I've been converting a Victorian greenhouse which includes a pretty rough concrete floor. I've been procrastinating for ages what...

We've had a nice stone flag path jointed by Jointex Easy Joint in the past - it looks good and is the thing the guy doing it has always...

Not in your scenario. In the confines of a duct, under load, the friction might be sufficient that you can't 'pop' it. In fact I reckon...

The duct was laid 3 years ago because I thought I might want it one day.. I’m just pleased I have it at all

If there is any possibility of additional cables being required in the future, install multiple ducts. Ducting is cheap. Digging up...