Recent content by d4nnyk

Sorry I mean the temperature sensor

Right I have installed the new diverter valve and all was well for about 5 minutes, then the boiler started making banging and gurgling noises then the pressure went right up and the boiler shut off. I had to hit the reset button to get going again, then it happened again. Seems I need a...

Thanks for your post, gives me confidence that the new valve will resolve my issue and it will be £75 worth spent. Many thanks

Just managed to source a complete diverter valve unit including DHW valve for £75 so going down this route, the service kits (for other diverter valves) come to £50 ish so thought mine must be the same region, so for saving time and hassle, the new valve route is the best option, just hope it...

Do you know what the correct service kit is?? and where I can source one as all i can find is diaphragm kits Many thanks

Hi thank you, I have done a recon on the diverter valve, replaced both diaphragms etc.. but the radiators still heat up when running hot water. Am I safe to say that a new diverter valve is needed or could it be something else? don't really want to spend £80 on a diverter valve and find out...

Thought that would be the case. Can you comfirm that I am right that only one pin should come out of the valve at a time, unless you have the CH on and the Hot Water Tap on Many thanks

Hopefully someone can help me. I have a Baxi Eco 80 Combi Boiler and although the Heating is turned off, the radiators heat up when running the hot water tap. I have replaced the diaphragm in the divert values and this has not resolved the issue. I have noticed that when I call for hot water...