dan2002's latest activity
-
dan2002 replied to the thread Water drain pipe area.So pour in some sharp sand and then use the mortar on top? -
Cut away more material so you are putting a decent sized lump back. Soak and then prime the existing with cement slurry (unless you want...
-
Hi, was wondering if anyone could help out? I have previously used mortar several times to seal and close the gaps/hole around my drain...
-
-
dan2002 replied to the thread Removing front upvc door.Yep your right, tried this before, was easy to take off. Think Im better off using my alley way passage and going through thag way
-
The handle is (probably) only two screws (from the inside). Then pull the square bar out if need be.
-
dan2002 replied to the thread Removing front upvc door.Height in mm 2000 Width in mm 704 Depth in mm 694
-
dan2002 replied to the thread Removing front upvc door.You reckon once taken off it will be easy to put back on? I was thinking instead of taking the door off to just take handle off
-
AFAIK you need to pop that cap off (1.47), then undo the four screws (2.29) for each hinge. Unless @crank39 or @ronniecabers know of...
-
Was wondering if anyone could advise. Will have to take my door off due to me getting a fridge delivered. How would I go about...
-
-
dan2002 replied to the thread Upvc trim coming off.So go with stixall?
-
Probably no nails mastic. Dries hard and brittle. It's not that good at sticking plastic as it brittle and don't stick well to...
-
dan2002 replied to the thread Upvc trim coming off.Its basically couple holes with dot and dab of tile glue or something like that. Tried drilling a screw through, doesn't go through
-
dan2002 replied to the thread Upvc trim coming off.A piece of wood was screwed into on the trim, on top of the wood was a light weight curtain pole. Surely i need to sort out behind the...
-
Hi, was wondering if anyone could help. On top of my window the plastic trim has basically all come off apart from the edge. Whats the...
-
