Sounds fishy i didnt realise i wernt aloud to take the cover off, hence me asking if im aloud to remove it or if it requires, after your feedback i have since contacted my friend whos gonna do the work. Im going city plumbing on the way home to get the part. Read the whole feed before piping up
because im ordering the part so its ready for him to fit, my mates a GSR engineer and it will save time if i order the part so he can change it when he gets here. We have no hot water or heating and its freezing.
When you say casing what do you mean. The silver front panel that covers the top 2/3rds of the boiler? I have isolated water and gas, drained system was going to complete the repair then get it all tested and re-comissioned at the end. But really cant see how you get to the bottom of the AAV to...
Hi, my IDEAL ISAR HE35 boiler has started leaking dirty water, its coming from the hole in the top of the automatic air vent. Any quick fix ideas? And if not does it require a new AAV, and does that require gas engineer works? Thanks all
Ok so my diverter valve cartridge has came and just taken the actuator off to get to it and the spring seems perfectly fine? Free from dirt etc...Could it be the actuator itself
Ok so heres an update, can someone confirm if its the diverter valve i need to replace...
so i isolated the boiler, let everything cool off. Then switched back on with the Central heating switched off, and the pipe that im pointing to on the photo instantly gets hot (during which period only...
Well i already taken off to realise i had incorrect size and i cleaned it out there was only a bit of perrished seal in there really seemed pretty clean but my mate said they can fail aswell as get blocked so iv got another heat exchanger on the way anyway which paid £8 for.
However i now feel...
Ahh thats good to know. Iv had a play around with the flow and basically i can get the flow rate low enough to get boiling hot water downstairs but then upstairs its barely coming out of the tap... (too slow) if i increase flow rate so its a decent flow upstairs, it goes luke warm again. Cold...
Yeah so the guy who sent it me has sent me a new one out, i already purchased the seals so have them. Had to fit the old one back on for now i have flushed it out as much as i can. Still got the hot water issue so hoping its a failure of the part inside rather than a blockage. Easy enough to...