Thanks for the reply, its just that I had one electrician who tried to install it but said he wasn't able to, muttered something about compatability so I decided to confirm yes or no. Engaged another electrician who is coming to install the unit tomorrow.
Thanks for your time.
Hi, good morning thanks for your reply, is the o-ring seated in the manifold or is it in the copper. I'm just looking at a spare parts list PDF but it doesn't give an exploded view of the manifold. The boiler pressure was and is maintained at 1.0bar. Thanks for the info, all the best for the new...
Morning All, I would appreciate any practical advice as to the cause/diagnosis of the leak shown in the attatched picture, the boiler in is a worcestor 28i rsf, installed in 2004 from new. 2 years ago I replaced the fan assembly(fan bearing wore on the motor shaft).The leak is causing a...
Hi All, as you can see from the pic I have a slight leak on my Worcestor 28i RSF boiler, the leak is heavier when the heating is switched off, losing about 0.3bar in 24 hours. Would appreciate any views advice in tackling this. The boiler was installed in 2004 from new. I replaced the fan...
Good evening all, my worcestor 28i rsf combi is leaking from from the primary flow elbow at the joint on the primary flow manifold, I washoping somebody with experience in this area might give me some advice on solving the issue myself.
Thanks in advance.
DJ