Recent content by dave5576

Thanks Blup, don't why I didn't think of shortening the clay pipe, I'll try the WC and if it doesn't flush satisfactory I'll remove the battens and take a disc cutter to the clay.

Thanks for your response, it's a clay pipe with an adaptor of sorts, it's soft and pliable, I'm no expert but haven't seen anything like it before, your comment about it may be a pain connector is interesting. Do you know the usual way of connecting plastic to clay?

Next problem is the height of the inlet into the stack, it's 200mm above finished floor level, every pan I've seen has an outlet at 180mm. I could raise the floor but don't really want to. I'm placing the toilet cabinet next to the riser so it will only be 250mm from centre of the pan outlet to...

Thanks, the rubber insert is longer than the boss, it might go further in if I enlarge the hole but concerned about it making an intrusion in the stack. I used silicon spray but I think washing up liquid would have been better.

Many thanks for your comments, got it done, ready for WC and basin. The slip coupling was a pig to slide over the pipe.

I've just found one at Travis Perkins: Wavin OsmaSoil S/S branch 90� 110mm black

Hi Ambien, I'm trying to install a similar setup to yours, but I cannot find a tee with a drain boss opposite the WC waste, do you know the name or source of your tee? Thanks

Thanks Hugh, I presume that's why tee's aren't available with a boss opposite the WC connection. Do you know the minimum height from the washing machine outlet to a boss?

Hi all, I'm building in cloakroom in my utility room. There is an existing soil stack I want to tee into. There is an existing washing machine waste feeding into the pipe which I need to keep. I want to tee in from the opposite side. All the black and grey tee fittings appear to have a fixed...