Recent content by davidcu

The pre-wash, wash light and rinse light brighten up simultaneously. Have checked temperature of the water and it is stone cold.

The error codes on my hoover hed 6612-80 diswasher show there is a fault with the temperature sensor. Could any tell me if you can test this in any way, also where can I obtain a new sensor as I've been on the internet and cannot find one. Thank you for your help in this matter..

my old drayton thermostat has numbers by the terminals, they are 1, 2 , and 4 and an earth terminal. The wiring diagram on my new one has 1(call), 2(sat) and com. does this mean 1 and 2 in both thermostats are the same conections and 4 is equal to com. earth is intergril as i was kindly told...

Went to replace the above cylinder thermostat with a drayton hts3 cylinder thermostat, However, when I took the covers off, the old one had 4 wiring points, 1for blue wire, 1 for brown wire, 1for black wire and 1 for the earth wire but the new one only has 3. could someboby please explain how I...

thank you once again for taking the time to reply to my problem with my dishwasher.

please help, my dishwasher does a prewash cycle, as it comes up to a main wash i hear a single knock from the bottom of the machine, then both the prewash and main wash light come on together. the machine has filled with water but not opened the soap door. this is how it stays and will not do a...