Recent content by dazzauk

  1. D

    Replacing a Danfoss TP5 Programmable Room Stat

    no its a small ish boiler with a separate hot water cylinder and small water tank above it. fair enough sounds simple, any particular make model you'd recommend? I've been looking at the Dafoss TP5000
  2. D

    Replacing a Danfoss TP5 Programmable Room Stat

    i have a danfoss tp5 programmable room stat that is hard wired to the boiler (i presume for control) and is battery powered. The unit is old and the programming button has more or less stopped working, so programming the thing is becoming a nightmare! Any suggestions for what i can replace...
  3. D

    Ideal Elan 2 Boiler Problems

    hello gents, the problem seems to have gone now after i got the air out the system by opening the screw on the hot water pump adjacent to the water cylinder - looks like it was just a little air in the system that was causing it to cycle on the hot water side. Thanks for all your posts and help...
  4. D

    Ideal Elan 2 Boiler Problems

    yes sorry 2 x 2 port valves - you can tell i'm not a heating engineer!! i'll have a look tonight and see if there is a bleed point above this valve, failing that i'll take a pic and post it later as i really dont have a clue! Something i havent noticed is if there is a thermostat attached...
  5. D

    Ideal Elan 2 Boiler Problems

    hi dave, yes i have 2 x 3 port valves in the cylinder cupboard upstairs, when i moved in i had an airlock and had to bleed air out of one of them to get the thing going (as there was a banging noise coming from the boiler and it would click straight off). they both make a noise when the...
  6. D

    Ideal Elan 2 Boiler Problems

    I am having a problem with my boiler, we have recently moved into a house with an ideal elan 2 boiler and a water cylinder upstairs. The boiler has been working fine but until yesterday - it still works fine for the central heating but on the hot water side has started firing up for 10...
Back
Top