Thanks for this.
Good to know. I wanted copper under the sink so it's pvc up to the cupboard and then copper with the copper push fit fittings. All the other taps around the house is the existing copper pipework with soldered fittings.
But thanks for the info. Food for thought
We used to have the tank in the loft, and immersion in the airing cupboard but the boiler was buggered when we moved in so changed the system to a combi
Hi.
Well I assumed it was normal until I used my mates who has the exact same model and his is massively better than mine.
I have 15mm to taps branches off a 22mm main incoming pipe and lever stopcock
Hi everyone.
Since we have lived here the water pressure has been pretty poor, having showers is terrible and we recently got a quooker tap which is so slow and splutters alot on boiling mode.
We had thames water out today to check. They measured 25 litres per min and 2 bar at the outside tap...