Recent content by dbhuwad72

I have a multi meter that can test any voltage. I will run this test on those wires and see what reading I get from the brown and blue wire.

Hi Stem, Just to add - I did not connect those two brown wires when I totally disconnected the thermostat as those wires were terminally disconnected when fitting the Hive system. When I fitted the hive system with the wires going in the correct wiring diagram the receiver did come on and light...

Hi, Firstly, the system is working fine after disconnecting the Hive system. Going forward I do not know what to do unless I get a decent non over rated and over priced central engineer to work out why these damn wires are wired in this fashion. I really was hoping to rectify this problem...

I am new to this forum and wish to know what I could do to rectify an issue with the wiring of my current system. Although it is been said that the wiring could be correct depending on how it is connected to the boiler and the wiring upstairs near the water tank. There is another wiring box...

I will trace it back to see where it is connected to. I am sure I put a multi meter a few weeks ago and got presence of current flow. I will apply another multi meter. Importantly, need to trace this wire first.

Apologies if I accidently hijacked the existing thread as I sincerely did not mean to do that. I thought I had created a new post, so happy to remove myself from here and try a and create a new one. Apologies again!

Hello I recently connected the new Hive system, hub, receiver, and thermostat but stumbled in working out the wiring on the receiver. I have attached a few pics of the wiring, but for some reason, the live is connected to the neutral, and live is connected to the neutral. The current system...