Recent content by dc6839

  1. D

    Scantronic 9448 and 9427 keypad

    All 3 in control box fuses OK. Tamper reset does not work, with either keypad. Pictures as requested. Thanks for your help.
  2. D

    Scantronic 9448 and 9427 keypad

    Can I disable the tamper circuit?
  3. D

    Scantronic 9448 and 9427 keypad

    Done as suggested. Tamper light stays ON. Intermittent tone all of the time. Unable to set alarm, just get two tone "beep"
  4. D

    Scantronic 9448 and 9427 keypad

    Thanks for your input. I'll try that tomorrow just in case the alrm activates ! Going to need long arms to reach the keypad and control box at the same time - LOL
  5. D

    Scantronic 9448 and 9427 keypad

    I did add some connectors on the 2nd attempt to avoid blowing fuses and to aid a quicker install.
  6. D

    Scantronic 9448 and 9427 keypad

    I did with my first attempt after which all appeared to be OK. ( I blew the fuse), but on the second attempt, when I insulated all of the wires, No. Thanks for your reply
  7. D

    Scantronic 9448 and 9427 keypad

    After many years of excellent service the keypad (Mk 1) became unreliable and so I changed it for the newer (Mk2) version, with larger buttons. The change went well until I took it out of engineering mode and since then the tamper light has been illuminated. I had tried to remove and replace the...
  8. D

    Ravenheat 802/20 Diverter Valve

    Great reply. Do you , or anyone else, want to come and do mine ? (for a small fee of course) :D
  9. D

    Ravenheat 802/20 Diverter Valve

    Thanks for the reply . Anyone in the N.E. Lincs/Humberside area that would like to do the job ? :D
  10. D

    Ravenheat 802/20 Diverter Valve

    How easy (difficult ?) is it to change the diverter valve on a Ravenheat RSF 820/20 boiler ? What would be a reasonable price for a plumber to charge and what would BG charge (estimates) ? thank you
  11. D

    Ravenheat 802/20 Hot water problem

    Thanks for the informative replies. Is changing the diverter valve something that I can do ? I know, you have no idea of my capabilities but I am good with plumbing having installed the complete central heating system some 11 years ago (only the water side as the gas side was done by a...
  12. D

    Ravenheat 802/20 Hot water problem

    Suddenly the hot water output on my Ravenheat 820/20 has stopped. When drawing hot water the main burners do not ignite. However if I turn up the room thermostat so that it turns on the central heating the main burners ignite and I can get plenty of hot water. The radiators are cold for as long...
  13. D

    Ravenheat 802/20 Hot water variable problem

    Hi, I have a 10 yr old Ravenheat 820/20 and it has had this problem for a few years now. In the summer, when the Central heating is turned off, the hot water supply is fantastic. As soon as the colder weather approaches and the central heating is turned on the hot water supply temperature...
  14. D

    Cold water supply and cold showers

    Hi everyone. Seems like a good forum. I have a 6 yr old Ravenheat 820/20 which has a strange problem. The central heating is fantastic (close loop) with scalding hot radiators. However my thermostatic shower is unreliable. In the summer, when the central heating is OFF its fantastic. Lots...
Back
Top