Recent content by dellybellybean

Hello sandyman44. I was wondering how your heating system is working. I have a thermal store that provides DHW and CH via solar thermal, a lig burner and if desperate an immersion heater. We are desperate a lot. So I am going to install a boiler. I am very confused as to how it should be...

I have just upgraded my panel to v3.02 and the old problem of IP address and MAC address resolution came back. See other threads. I am an IP network engineer and I struggled to get this to work. It seems that the ComWifi will not exchange MAC address with some routers. Mine is a SKY router and...

Just switched off error reporting.

After 2 weeks error free I gave had 3 come errors over the last 3 days. Seems I still have the issue.

Strangely I have not had a com 1 error for 2 days. I have changed nothing except switched off ats path faults.

Thanks. The com wifi does the same. Seems to get stuck in a loop. Also evident if you leave a ping running you can watch the response times increase. Do a reset and it all starts working again. Are you on v2.x firmware on the panel as well. I notice in v3 release notes it says multiple devices...

I am having a very similar issue. But with a comwifi. No feedback from texecom email support yet. Originally it was just not visible on the network. I found that it was not advertising its MAC address So I manually added the IP and MAC address to my laptop arp cache and it worked. I could now...

I had a lot of problems with the comwifi. I was able to connect to it via it's own direct wifi. But was not able to connect via the home wifi. I suspected the router at first. But it was of course teh ARP cache. It had the MAC address of the 10.x.x.x interface in the cache. I manually edited the...