Recent content by DeltaFoxtrot

That makes sense, there’s just one on that side and 3 on the other. Thank you

New pump fitted, all the taps work perfectly. Maybe those pumps don’t last more than 10 years in a hard water area..

Morning all, I’ve just fitted some under cabinet lights in my kitchen and am experiencing a slightly strange delay when switching off the lights. One of the lights is taking half a second or so longer than the other lights to switch off. It’s the same light switch but the offending light is...

Well after asking the plumber to take a look at it and a leak developing, leading to replacement hoses it’s now on permanently whether there’s water or not ‍♂️ I’ve tried testing the system for air but it’s still doing it. Looks like a new pump needed after all!

No joy with that, but I have found that if I switch on the hot on both affected taps the pump kicks in.

It’s a Bristan Varispeed 50. Yes there are isolators on both the kitchen and basin taps.

Thanks Harry. I can’t see any adjustment to the flow sensor though. All I can see is boost adjustment which seems to control how hard the pump works.

Morning all, I’m having some issues with the Bristan Varispeed hot water pump that forms part of my system and am looking for some advice. I moved into the property earlier this year and at that time the pump (mounted at floor level by the hot water tank) would kick in on the hot supply on both...

I don’t like the look of this!

That makes sense - I was thinking there weren’t as many wires as I would expect and they’re not the same as the ones going to the thermostat.

Yes I have a separate hot water tank. So basically I need to figure out which wires are currently going into the programmer from the thermostat, and connect those to T1 and T2 on the heatlink to use them as 12v power supply to the Nest thermostat?

Good afternoon, I’ve trawled through a few of the threads on here but unfortunately not found an answer to my specific question, although I’ve definitely learned a lot! I’m looking to replace my existing Siemens RWB29 controller and Honeywell thermostat with a Nest Gen 3. All seems...