Recent content by derekreid123

Transformer is Halolite 1-16w LED Constant Voltage Driver from Screwfix, within IP65 enclosure box

A few years ago I installed the small recessed deck kits within my timber decking, due to the amount of lights and with it being external I removed the combined plug/transformer and female connectors pre fitted on each LED cable, I put in my own transformer seperate and connected all deck lights...

I am currently wanting to install a IP rated socket on my external wall of the house to enable me to use this for lawn mower, etc... I have a conservatory that I presume had the downstairs ring circuit extended into it, I have since added small LED decking lights fused at 3amp and with small...

I have recently acquired a new bathroom extractor fan which has a humidistat and a run on timer built in which my old one didnt. The fan is wired through a fan isolator located just outside the bathroom adjacent the lightswitch. I have installed the new fan but doesnt seem to be working...

Purchased a new 9.5kW electric shower and would like to know if can install using the existing wiring and MCB. The existing wiring is 6mm approx 12m run with 50A MCB and goes through a 45A DP pullcord switch. The cable runs within loft space for about 3m where wool insulation is located...

The cablke runs through insulation in the loft for a short distance maybe about 3m

Purchased a new 9.5kW electric shower and would like to know if can install using the existing wiring and MCB. The existing wiring is 6mm approx 12m run with 50A MCB and goes through a 45A DP pullcord switch. Would this be sufficient? Or would i require to upgrade the cable to 10mm or...

Purchased a new 9.5kW electric shower and would like to know if can install using the existing wiring and MCB. The existing wiring is 6mm approx 12m run with 50A MCB and goes through a 45A DP pullcord switch. Would this be sufficient? Or would i require to upgrade the cable to 10mm or...