Recent content by Dfalconer

When i originally took of the radiators they needed bled quite a bit and i think that this time the pressure coming from in the radiator was higher. So i gradually let it fizz away and it eventually calmed down. Thansk to all that read the post and thought about it for me.

Hello i have a combi boile rcentral heating system. All the radiators have a valve at either side, which are identical in appearance and both can be turned by hand. In the past i have easily removed the rads by screwing down woth plastic caps at either end. However at the weekend i went to...

FAQ is always a good place to start as it plainly says.....thanks i will check out the things on the list when i get home tonight, and report back. My main concern was that i had put a hole in a pipe but if so i would still expect some heat to get through and also i would expect a pressure drop.

I should also mention that both in and out pipes remain cold.

I dont think so. The left hand plastic cover does not uscrew anything when turned it is stiff and then turns and then is stiff again. The right hand cover untwist to open and close the radiator. Both valves look pretty plain. Sorry about the crap info but i dont have a clue when it comes to...

Just noticed our bathroom radiator is cold. Single level house, combi boiler, we have hot water and all other radiators are fine. Have been nailing plywood into floor of bathroom but used very small nails and i am sure i havent hit a pipe, there has been no pressure drop in the boiler. Radiator...