dilalio's latest activity
-
dilalio replied to the thread Radiator Sludge.If you want to do it properly and have the time... A couple of temp clamps and adjust lockshield until getting the correct deltaT -
dilalio replied to the thread Radiator Sludge.Best thing if you don't know anyone is to go into your nearest "independent" trade merchants and ask them to recommend someone.
-
dilalio replied to the thread Radiator Sludge.I'd be using the magnets to catch as much as possible and then dumping the water down the loo, not the sink.
-
dilalio replied to the thread Radiator Sludge.Purging flow and return into a bucket /hose while rad is off will reveal a lot.
-
dilalio replied to the thread Has the boiler fitter bypassed our water softener???.If the top pipe (where there is a new tee off) is the cold mains to the water softener, and that new tee feeds cold mains to the boiler...
-
dilalio replied to the thread Radiator Sludge.Care to include the 12 defects? Be interested to know.
-
dilalio replied to the thread Radiator Sludge.If the pipework is furred up/blocked then that needs either flushing or repiping! Did it work well before? What boiler was replaced...
-
Taking rads off and flushing them outside with a hose is going to clean them far better than a powerflush
