Recent content by disinfo

No. No zone 2 light was Illuminated. I'll go have another look tomorrow and get some more info. It's been a long week! Thanks so far all.

Replaced

I'm not round there at the min, but from power on basically everything lights up at once then goes off, and then when the double beep stars occurring, only the unset and power lights are lit. They only have door contacts. No detectors.

Hello, My neighbours have the above alarm in their rented property. It recently started nuisance alarming so they removed the fuse from the FCU until it died. On trying to repower the alarm all they are now getting is a series of double beeps, and from the manual that seems to indicate a...

Hello, My (very old) boiler is not firing up. Reset button is in, and holding. Fan runs. Air pressure switch changes state when fan is running. Gas valve feels like it pulls in. (I'm not totally sure about this, but something clunks and it feels like the gas valve) Then after that...

Hello all. I'm wanting to lay a new floor in my front room. The current sub-floor is 22mm T&G chipboard flooring, the floor seems flat and is currently creak free so I'm loathed to pull the whole thing up. The floor I've settled on is engineer wood T&G. Right in the doorway there is a lintel...

Sorry to jump on this. Can I assume then that the new tools are not backwards compatible with the 3.0 batteries either. My BHP451 gearbox has had it, was gonna upgrade but may as well just get another BHP451 body from eBay whilst they are still available.

Excellent, I like the stair rods! Last time I used screwfix own brand stair protector, I left it on the stairs and the route to the front door for two weeks, it left a sticky residue behind.

It was corrected, it was glanded into the panel like it should have been. When I looked up the Cu equivalent of the armour, divided it by 40 and multiplied it by five I think it worked out at about 0.9mm from memory. Zs at the panel was 0.11, I realise there may have been parallel paths...

This is the incoming supply to a power press that I've been called to a fault on this morning. I've had time to write this post because i'm sat in the canteen until the maintenance electrician sorts it. I'll be here a while from experience. A grand total of five armour strands are...

If electronics is your thing, and your meter has a pulse output. http://openenergymonitor.org/emon/buildingblocks/introduction-to-pulse-counting Alternatively the industrial solution; http://www.socomec.com/range-multi-function-meter_en.html?product=/diris-a40_en.html Both can be...

Oh an also, Rockwell came back to me; 32A AC-1 contacts can be used as 25A DC-1 contacts, so happy days

I won't be, I'll simply be having my device e-stopped by the machines existing e-stop circuit. Even If I created my own e-stop controls, I'd still have to interface with the machines e-stop circuit as its all part of a single automatic line. All done in accordance with BS EN 60204 and BS...

:? //www.diynot.com/forums/electrics/batten-holders-questions.360189/#2725514