Recent content by DIY 22387

Hi the original door step was made of composite the frame is wood, which rotted at the bottom, I've repaired the bottom of the frame. Ultimately I chose to push three sheets of 25mm PIR in the 75mm gap (edges taped) all the way down to the ground level so it is firm does not move and level...

Thanks for the reply, Yes the rest of the screed is dry Picture (IMG_150414456) is a close up of the cut DPM and the left hand side of picture 7 (IMG_184410039) the brown bit at the top of the picture is the cill/threshold. Inside the vertical the cavity the DPC and tray are a bit of a mess...

Hi, I need some advice on the best way to deal with a cut DPM and DPC on the threshold of the front door. I had to replace a rotten door frame and water damaged carpet but when I removed them I found some broken screed which, when removed, revealed the DPM had been cut at the frame bottom and...