Recent content by dmcc

I went back having posted my request for help and did it. What I did was removed the headlamp bulb. You can then get a finger round to support the rear of the reflector close to the grooves. Have the adjuster screwed out as far as it will go. Offer it up to the top end of the grooves and it can...

I have a Citroen Picasso 04 2.0HD just coming up to 100000 miles. The nearside flasher failed recently and I replaced it but not before I managed to inadvertently remove the motorized adjuster. Stupid I know but I did it and I am having great difficulty getting it back. The adjuster end has a...

I'm not sure I know what you mean. I would have thought 28mm would be so big the olive would never grip the pipe which is only an annoying amount larger than 22mm. Or am I missing something? Don

No sorry we are at cross purposes, the pipe is bigger than 22mm, in fact bigger than 7/8" so 3/4" olive would be going in the wrong direction.poses

Yes to both your queries. I have been thinking since I asked this that the best solution may be to strip this pipe out and replace it with 22mm. Not what I had anticipated but maybe the easiest solution in a small house.

Must be the 20 thread as it is definitely at least .5mm too big for a 22mm compression elbow. 7/8" was just my guess based on a tape measure. It is a really old installation. Thanks for your reply.

I am trying to fit a shower for my aged in-laws and have hit a snag. The hot supply comes into the bathroom being converted to a shower room and I am trying to hide the existing plumbing under floor. I thought the hot supply was through a 22mm pipe but I now find it is 7/8" (or ~ 25mm). Is there...