Recent content by dommo

Jackthom< thanks for that hint,,, sorry for delay in reply, the micro switch was faulty, all working perfect now,, Thanks guys

Roadside patrol for 17 years with major breakdown company,,, essentially check the spare,, do not go for a fancy car that does not carry a spare and just gives you a can of garbage to try re inflate it. Always insist on the locking wheel nut key/socket, there should be 2 really so you got 1...

I'd say you have flooded it mate. Did you start it up at all yesterday and not move it??? You'd need to take fuel pump fuse out and crank it over for a bit, or call the RAC to do it if you are unsure.

Wow you are testing me. i had to take the back of the pcb off but found the ext therm/timer link. I disconnected it but this has had no effect when i restarted the boiler..

ok guys here goes. About 11 months ago boiler expansion vessel diaphram was leaking and i was led to believe it was a very difficult job to do, so a corgi guy fitted an external vessel next to boiler. Since about the time i was getting the vessel replaced the CH just kept on all day and the...

guys i'm a motor vehicle technician for 30 years and I found the advice very helpful. I did check what temp sensors I could and they are functioning ok, there is no frost protection sensor fitted to it so i am still a bit stuck,

jackthom and fanboy,thanks guys,, clock timer was connected ok and the idea of a frost safety switch sounds logical,,i'll check if this model has this feature,,

no there is no room thermostat

Can anyone help? I had a strange fault on my combi, which is 10 years old and has been quite reliable, only having to fit an external expansion chamber last year. When the boiler is switched on the CH runs all the time despite the clock timer being in the off position and the control knob being...