Recent content by DonaldJ

What's on the other side of the wall? Can you site he socket on the other side? Even if you can, you will probably still be left with the issue of removing a fitting and thus the permitted safe zone as mentioned above but just a thought anyway.

I'd considered this but wasn't sure if it was allowed. So basically, what I'd do is connect the two 2.5mm radial conductors into the supply side and then run 1.5mm from the load side to create a lighting circuit? I could then use this cable to create either a loop in or a JB lighting circuit...

Cheers Chivers, I can't find a marking on the light showing an IP rating. It does however have a bulb fully enclosed in glass unlike a normal downlighter although this isn't an indication of IP rating I know. There also isn't a CPC for the lights. The earth is just twisted together and...

Hey all, Been reading for a while but just registered and this is my first post. My apologies for the very long post but I figured it best to try my best to describe the situation as fully as possible so I can hopefully make it clear enough to get the best advice possible. I need a bit...