Recent content by DoogyDawg

"it would presumably only work if the "120m solid duct" were appreciably recessed into the wall" It is.

That's an idea.

Hmmm...I didn't think of that. My nephew 3D prints. (y)

I thought I would start a new thread regarding looking for an extractor fan rather than mix it to a previous one. All the fans we have been looking at, and the one which have decided on is a 100mm. But the solid duct is 120mm. I realise that since the outlet pipe is 120mm, why not just go for a...

After having a look, I think we might got for that. Thanks very much.

Cheers. Our budget is up to £100, since we spent so much having the ensuite done, we might as well get a good fan. The one which was in there previously, and we have it throughout in the bathroom and downstairs loo and utility room, the type which has veins on the front, that open just after the...

I wasn't sure if I could tag you all in or not, so I left it, but I hope you all get to read this. This may be a bit long, but first I want to thank you all for the info you have given. Before we had the ensuite redone, we had carpet in there, but because it was old, it had been worn down, as...

Cheers (y)

Cheers for that. I'll take a look.

Cheers for that, new carpet the other side with a thick pile. :confused:

Not silly at all. "they have some good one in either of those". The ones I mentioned in my original post, he wouldn't commit as to a certain one.

Sorry for getting back so late. No, that's the other problem, we had new carpet on the other side in the bedroom with a thick pile. The only air we have coming in is cold air through the vent at the top of the window id we slide it open.

As it says really. The impossible I know, but thought I would ask any way. I need to get a Zone 1 extractor fan. (wall mount) 100mm 4" blades. Backdraft feature, built in, not anything you have to stick in the pipe. High (as possible air intake 74?? or what ever it is) Fan grill showing, not the...

Cheers for that, I'll have a read.

Hi. We bought a new freestanding Miele Dishwasher, Model number G7130 around two weeks ago. We had our usual plumber install it for us as we needed an elbow fitted to our inlet supply pipe to enable it to point downwards so the dishwasher Aquastop (solenoid) to work as the instructions. We...