Recent content by Drawllimuk

At this point, I don't think I do. Time to stop trying to do a thousand things at once, take a breather and triple check everything...:D :oops:

@SUNRAY , i just think that I have confused matters!! I did follow how @EFLImpudence showed, only difference is that I used as you said a 3 core and earth, therefore leaving the blue spare to use as a neutral. It's connected to the neutral line at the other end ready. So I am just checking if...

Ok, Ok. Many thanks to everyone that helped. I followed the diagram that you posted @EFLImpudence and it works at treat. I now have one more favour to ask this fantastic forum. I now need to convert that to a three gang Smart Switch. Can anyone help? Or am I being stupid? I even pulled through...

Hi sparkwright, ideally yes I would like a neutral so I don't have to have a capacitor! The cables are in conduit, however the conduit is no longer in the wall as I have chipped the plaster away to expose the conduit. Am I right in assuming that I could change one of the t&e into a 3&e and bring...

Ok, Ok, I know that this question will have probably been asked a thousand times, so I'm gonna make it 1001!! I live in a late 60's early 70's property. I currently have a 2 gang switch in the kitchen that I want to convert to a 3 gang smart switch. Here's my issues: 1. The back box is 16mm...

Sorry, don't think I made it clear. The porch used to be an open porch, but it is now an enclosed one. Had been for some fifteen years. The level of the porch floor is some 25mm lower than the internal floor, which is why I need to level it to bring it level. The floor will be one run of...

Hi There, Newbie Question.... I am currently in the process of renovating my porch. While doing so I noticed that the concrete floor was moving. After some investigation work I decided to pull it up. It turned out that it was a concrete pad about 25mm thick sitting on the original concrete...